BAR MITTS HANDLEBAR POGIES LARGE BLACK

Mountain Bike Pogies:  Used for flat bars / commuter bikes

• Those who suffer from Raynaud’s or numb, cold hands due to the cold, wind, rain or snow can continue to ride in comfort
• Waterproof & Windproof. Reflective material on seam and logo
• Neoprene has a closed cell construction that features closed air bubbles that serve as insulators
• Bar Mitts stay open and stiff allowing for easy access and removal of hands and can be used with a thin liner or lighter glove allowing for increased dexterity
• Large & XL work on Jones H Bars

• Standard Sizes: (S/M, Large or XL)
• 5 mm thick neoprene with nylon lamination inside and outside
•  Velcro  cinch that attaches to the handlebars to help keep the mitts in place.
• If you have a mirror or bar ends, there are options for both.
• For a bar end mirror, there is 1 hole on 1 mitt
• For bar ends / horns, there is 1 hole in each mitt
• The inside velcro cinch will remain in the mitts even with the hole for bar ends or bar end mirror but can be removed if you do not want to use it

• Extreme Sizes: (S/M, Large or XL)

• 6 mm thick neoprene , fleece lined (non removable) inside and nylon lamination on outside
• Velcro removal cuff where your hands go in and out of the mitts
• Zipper along the front edge of the mitts to allow for ventilation if it gets too warm
• Used for colder climates or for people that get exceptionally cold hands and want to wear a heavier glove
• If you do not have a mirror or bar ends/horns there is bar end plug in each mitt
• For a bar end mirror, there is 1 hole on 1 mitt
• For bar ends, there is 1 hole in each mitt

• S/M:  is 10″ wide across shifter/brakes & 11″ long
• Large:  is 10.5 wide across shifters/brakes, 12″ long & has a 1″ gusset on the inside & outside seam
• XL:  is 13.25″ wide across shifters/brakes, 13″ long & has a 1″ gusset on the inside and outside seam